Arizona Road Signs Test

4.7 out of 5 (280 votes)
80% Passing score
10 Questions
2 Mistakes allowed
Getting ready for the AZ MVD permit test is not just a matter of memorizing a few red octagons and yellow diamonds, although, yes, you should know what those mean. Arizona’s written knowledge test is based on the Arizona Driver License Manual and covers a lot of ground: traffic laws, road signs, signals, pavement markings, right-of-way rules, alcohol and drug laws, safe driving habits, and the sort of basic road judgment that sounds simple until you are actually sitting in traffic on a hot Phoenix afternoon. The official Arizona permit test has 30 multiple-choice questions. You need 24 correct answers to pass, which means an 80% score, and you can miss only 6. Road signs are part of that test, not a separate little side quiz that can be ignored. They count. And in Arizona, where one drive can take you from city streets to open desert highways to mountain roads that suddenly get a little too interesting, signs do a lot of quiet work. They warn you, slow you down, sort out the lanes, and generally keep everyone from improvising, which is usually where driving gets messy. This Arizona road signs test gives you 20 multiple-choice questions focused on sign recognition, sign meanings, shapes, colors, symbols, traffic signals, lane markings, pavement markings, work zones, railroad crossings, stop and yield signs, speed signs, and other pieces of the AZ practice permit test that tend to show up when you least want to second-guess yourself. The questions are written to feel like real test practice, not trivia, and that matters. You are not studying road signs so you can admire them. You are studying them so you can make the right call quickly. When you finish the AZ road sign recognition test, you will see what you missed and what the correct answers were, which is honestly where a lot of the learning happens. A wrong answer here is cheap. A wrong answer at the MVD is annoying. A wrong answer on the road is, well, worse. Just remember, passing the written test is only one part of getting your Arizona instruction permit. You will still need to handle the office requirements, including documents, the permit fee, your photo, and a vision screening to make sure you can actually see the road you are about to drive on. This practice test helps you tighten up the knowledge part before that day arrives.
FREE DMV Practice Test App
Study for your Arizona permit test or driver’s license with the NextDoorDriving app. 700+ DMV questions and answers, 100% free!
Download on the App Store

Sample Arizona Permit Test Questions

Question 1

What roadway condition does this warning sign identify?

This sign means:
  1. A A dip in the roadway
  2. B A soft shoulder
  3. C A pedestrian crossing
  4. D A required stop

Correct answer: A – A dip in the roadway

This is the DIP warning sign. It alerts drivers to a depression in the roadway ahead rather than a shoulder or pedestrian hazard. Approach at a speed appropriate for the roadway and visibility conditions.

Source: Arizona Manual of Approved Signs — W8-2, “Dip”, MUTCD with Arizona Supplement — § 2C.26, “BUMP and DIP Signs (W8-1 and W8-2)”

Question 2

What roadway alignment is shown by this warning sign?

This sign means:
  1. A A sharp right turn
  2. B A curve to the right followed by one to the left
  3. C A curve to the left followed by one to the right
  4. D The end of the pavement

Correct answer: B – A curve to the right followed by one to the left

This is a reverse-curve warning sign. The symbol shows that the first curve bends right and the second bends left. Turn and curve signs warn of changes in roadway alignment, and an advisory-speed plaque may be posted below the sign.

Source: Arizona Manual of Approved Signs — W1-4, “Reverse Curve”, Arizona Driver License Manual and Customer Service Guide — § 3, “Turn, Curve and Winding Road Signs”

Question 3

For a standard vertical traffic signal, what is the color order from top to bottom?

From top to bottom, the following is the proper order for traffic lights:
  1. A Red, yellow, green
  2. B Red, green, yellow
  3. C Green, red, yellow
  4. D Green, yellow, red

Correct answer: A – Red, yellow, green

A vertical traffic signal is arranged with red on top, yellow in the middle, and green at the bottom. Red requires a stop, yellow warns that the green movement is ending, and green permits movement when the roadway is clear. Drivers must obey the illuminated indication.

Source: Arizona Driver License Manual and Customer Service Guide — § 3, “Signal Lights”

Question 4

In Arizona, what does a painted curb tell a driver?

  1. A Only emergency vehicles may park there
  2. B Passenger loading is always permitted
  3. C A special stopping or parking restriction applies
  4. D Stopping is prohibited at every painted curb

Correct answer: C – A special stopping or parking restriction applies

A painted curb indicates that special stopping or parking rules apply. The driver manual identifies white for briefly picking up or dropping off passengers, yellow for loading or unloading while remaining with the vehicle, and red for no stopping, standing, or parking. Check the color before stopping.

Source: Arizona Driver License Manual and Customer Service Guide — § 3, “Painted Curbs”

Question 5

At this red octagonal sign, which action is required?

When you see this sign, you must:
  1. A Come to a complete stop at the required location, then proceed when permitted
  2. B Reduce speed but continue without stopping
  3. C Stop and wait for a green traffic signal
  4. D Stop only when another vehicle is visible

Correct answer: A – Come to a complete stop at the required location, then proceed when permitted

Arizona law defines a required stop as a complete cessation of movement. At a stop sign, stop before the near-side crosswalk; if there is none, stop at the marked stop line or the nearest point with a view of approaching traffic. Check for traffic and pedestrians before entering.

Source: A.R.S. § 28-601(25) – Definitions, A.R.S. § 28-855(B) – Stop signs; yield signs, Arizona Driver License Manual and Customer Service Guide — § 3, “Controlled Intersections”

Question 6

What does this warning sign indicate?

This sign means:
  1. A Trucks below a posted weight are permitted
  2. B A hill or grade is ahead
  3. C A truck service area is ahead
  4. D Trucks are prohibited

Correct answer: B – A hill or grade is ahead

This is the Hill warning sign. It alerts drivers to a hill or significant grade ahead, not a truck restriction or service facility. Be prepared to adjust speed and vehicle control for the grade and existing roadway conditions.

Source: Arizona Manual of Approved Signs — W7-1, “Hill”, MUTCD with Arizona Supplement — § 2C.14, “Hill Signs (W7-1 and W7-1a)”

More Arizona Permit Practice Tests