Mississippi DMV Sign Test 3

4.9 out of 5 (80 votes)
80% Passing score
20 Questions
4 Mistakes allowed
This Mississippi DMV practice test is built around the material that actually matters for the state’s learner permit exam: road signs, traffic signals, pavement markings, safe-driving rules, and the kinds of Mississippi-specific laws that can quietly show up in the wording. It is not trying to turn the whole driver’s manual into a lecture, thankfully. The point is more practical than that. You work through sign shapes, sign meanings, right-of-way situations, and common permit-test topics until the answers start feeling less like guesses and more like things you recognize. Mississippi does not describe a separate road-sign-only test for a regular learner’s permit or Class R license, which is worth knowing before you study. Road signs and signals are folded into the main computerized knowledge exam. The commonly reported format is 30 multiple-choice questions, with 24 correct answers needed to pass, so missing too many “easy” sign questions can hurt just as much as missing a traffic-law question. And, well, easy is a generous word sometimes. A stop sign is obvious. The difference between two warning signs, or what a sign shape tells you before you can read the words, is where people get a little too casual. This free MS practice permit test gives you a place to make those mistakes before they count. After you answer, you can review what you missed and read the explanations, which is usually where the real studying happens — not in the clicking, but in that slightly humbling moment afterward when you realize you knew the rule halfway, just not cleanly enough. The real Mississippi knowledge exam is taken in person through the Driver Service Bureau, and electronics are not allowed in the testing area. Phones, earbuds, smart watches, all of it needs to stay out. Cheating or using electronic help can cancel the test and may keep an applicant from testing again for 6 months, which is a fairly expensive lesson for something a practice test could have helped avoid. For new drivers, the licensing details matter too. A regular learner’s permit starts at age 15, requires the knowledge exam and vision screening, and applicants under 18 need school attendance documentation. Permit holders must drive with a licensed driver age 21 or older seated beside them. At 16, most applicants need 12 months with the permit before moving to a regular Class R license, while applicants 17 or older may be able to complete the permit and license process the same day if the requirements are met. Use the Mississippi DMV sign test as a steady run-through before the real exam, especially if road signs feel familiar enough that you are tempted to skim them. That is usually the material worth practicing twice.
FREE DMV Practice Test App
Study for your Mississippi permit test or driver’s license with the NextDoorDriving app. 700+ DMV questions and answers, 100% free!
Download on the App Store

Sample Mississippi Permit Test Questions

Question 1

What is the general purpose of a yellow, diamond-shaped sign with black markings?

A yellow and black diamond-shaped sign:
  1. A To warn of a roadway condition or hazard
  2. B To provide directions to nearby destinations
  3. C To state a traffic law or regulation
  4. D To mark a highway work zone

Correct answer: A – To warn of a roadway condition or hazard

A yellow diamond-shaped sign generally warns drivers about an existing or possible hazard on or near the roadway. Orange signs provide warnings for construction, maintenance, or other temporary traffic-control areas. White rectangular signs are commonly used for regulations, while green signs provide directional guidance.

Source: Mississippi Driver’s License Manual — “Traffic Signs and Signals,” “Standard Shapes and Colors”

Question 2

A yellow curb is accompanied by a NO PARKING—LOADING ZONE sign. What may a driver do there?

  1. A Stop only as permitted to load or unload
  2. B Park for any length of time if driving a bus
  3. C Park only while operating an emergency vehicle
  4. D Use the space as accessible parking

Correct answer: A – Stop only as permitted to load or unload

The loading-zone sign permits the space to be used for loading or unloading rather than ordinary parking. In Mississippi, drivers must obey posted stopping and parking restrictions at the location. Any stated hours, vehicle restrictions, or time limits also apply.

Source: Manual on Uniform Traffic Control Devices, 11th ed. with Revision 1 — § 2B.53, “Parking, Standing, and Stopping Signs (R7 and R8 Series)”, Mississippi Driver’s License Manual — “Parking,” “Prohibited Parking”

Question 3

At a Mississippi intersection, which signal requires a complete stop?

  1. A A flashing red light
  2. B A steady yellow light
  3. C A steady yellow arrow
  4. D A flashing yellow light

Correct answer: A – A flashing red light

A flashing red signal requires you to stop completely. After stopping, proceed cautiously only after yielding as required and determining that the intersection is clear. A flashing yellow signal calls for reduced speed and caution but does not impose the same stop requirement.

Source: Mississippi Driver’s License Manual — “Traffic Signal Lights,” “Flashing Red Light”

Question 4

A roadway is marked with two solid yellow centerlines. Which statement is correct?

  1. A Passing is prohibited for traffic in both directions
  2. B The roadway carries traffic in only one direction
  3. C The area between the lines is a shared turn lane
  4. D Drivers may cross the lines to overtake slow vehicles

Correct answer: A – Passing is prohibited for traffic in both directions

Two solid yellow centerlines mark a no-passing area for both directions of travel. Mississippi’s manual specifically states that a driver must not cross them to pass, even when the vehicle ahead is moving slowly. Broken yellow markings are used where passing may be permitted under safe conditions.

Source: Mississippi Driver’s License Manual — “Passing Other Vehicles,” “Passing on a Two-Lane Highway”

Question 5

What does a broken yellow centerline indicate on a two-way roadway?

A broken yellow center line on the roadway means:
  1. A Passing is prohibited in both directions
  2. B A driver may cross to pass when the maneuver is safe
  3. C A lower speed limit begins ahead
  4. D Left turns are prohibited

Correct answer: B – A driver may cross to pass when the maneuver is safe

A broken yellow line separates lanes moving in opposite directions. A driver may cross into the oncoming lane to pass only when passing is otherwise permitted and the maneuver can be completed safely. Remain to the right of the centerline when you are not passing.

Source: Mississippi Driver’s License Manual — “Pavement Markings,” “Lane Lines, Center Lines, & Barrier Lines”

Question 6

Your signal turns green, but vehicles are still occupying the intersection. What should you do?

  1. A Wait until the intersection is clear before entering
  2. B Drive around the vehicles if there appears to be room
  3. C Enter the intersection and wait behind them
  4. D Sound your horn and proceed into the intersection

Correct answer: A – Wait until the intersection is clear before entering

A green signal permits you to proceed only when it is safe. Mississippi’s manual requires drivers to yield to vehicles and pedestrians already within the intersection. Remain behind the intersection until the occupied area clears and you can proceed without creating a conflict.

Source: Mississippi Driver’s License Manual — “Traffic Signal Lights,” “Solid Green Light”

More Mississippi DMV Practice Tests