Ohio Road Signs Test 2

4.9 out of 5 (588 votes)
80% Passing score
20 Questions
4 Mistakes allowed
Most Ohio permit prep gets treated like a quick pass through the manual, a few familiar signs, and then a little optimism. That is a shaky way to handle it. Road signs are part of the main Ohio permit knowledge test, not a separate afterthought, and the same exam is used to qualify for a Temporary Instruction Permit Identification Card, or TIPIC. The test has 40 multiple-choice questions, and you need 30 correct answers to pass. A 75% score sounds manageable, sure, but 10 allowed misses disappear fast when sign meanings, traffic control devices, and rule-based scenarios start blending together. This Ohio road signs test gives you focused practice on the sign material that sits inside the larger exam. Regulatory signs, warning signs, guide signs, lane-use markings, right-of-way situations — all of it matters, and not only because you need to identify a shape or color. The real issue is knowing what the sign is telling you to do. A sign question may look simple at first glance, and then, well, there it is asking about the driver’s actual responsibility, not just the name of the sign. The official study source is the Ohio Driver Manual, also called the Digest of Motor Vehicle Laws, and it goes well beyond sign recognition. Applicants are expected to understand Ohio motor vehicle laws, rules of the road, safe driving practices, driver responsibilities, highway traffic control devices, and state-specific requirements. Ohio’s Move Over law is a good example: when approaching certain stationary vehicles with flashing lights, drivers must move over when possible or slow down and proceed carefully. That kind of rule can show up in more than one costume on the test, which is a slightly irritating but very real thing. You can begin the TIPIC process at 15 years and 6 months. For younger drivers, passing the knowledge test is only the first step before driver education, supervised driving hours, night driving, and eventually a probationary license. So this Ohio permit practice test is not just about getting through a handful of road sign questions. It is about building the working knowledge you will need once you are actually behind the wheel. Take the Ohio temps practice test as many times as you need. Each attempt gives you a results summary and shows the correct answers for missed questions, which is where the useful studying usually happens. The goal is to walk into the Ohio permit sign test knowing what the signs mean, what the rules require, and where the test is likely to press a little harder than expected.
FREE DMV Practice Test App
Study for your Ohio permit test or driver’s license with the NextDoorDriving app. 700+ DMV questions and answers, 100% free!
Download on the App Store

Sample Ohio Permit Test Questions

Question 1

A parking space has a sign or painted curb indicating a one-hour limit. What does this restriction mean?

  1. A Only emergency vehicles may stop there
  2. B Only passenger loading is permitted
  3. C Parking is allowed only for the stated time
  4. D Stopping and parking are completely prohibited

Correct answer: C – Parking is allowed only for the stated time

A posted or marked one-hour restriction permits parking only for that limited period. The Ohio Driver Manual instructs motorists to check nearby signs and painted curbs because they may prohibit or limit parking. A time-limited space is different from a no-parking or passenger-loading area.

Source: Ohio Driver Manual — § 5, “No-Parking Zones / Handicapped Spaces”

Question 2

Why should you pause and scan left, right, and left again before entering an intersection on a green light?

  1. A Another road user may enter despite a red signal or sign
  2. B You must stop after entering every signalized intersection
  3. C Cross traffic always receives a green arrow at the same time
  4. D Pedestrians on the cross street always have priority over a green light

Correct answer: A – Another road user may enter despite a red signal or sign

The Ohio Driver Manual advises pausing when the light turns green and checking the intersection before proceeding. Drivers should search for cross traffic, pedestrians, bicycles, traffic controls, and areas of limited visibility. A green light permits travel only when the intersection is clear; it does not guarantee that every other road user will obey a red signal or sign.

Source: Ohio Driver Manual — § 5, “Intersections and Turning” and “Tips”

Question 3

What is the usual purpose of a yellow, black-lettered diamond sign?

A yellow and black diamond-shaped sign:
  1. A To warn of a possible roadway hazard or condition ahead
  2. B To provide directions to cities or highway services
  3. C To state a traffic law or regulation
  4. D To mark a work zone using its standard color

Correct answer: A – To warn of a possible roadway hazard or condition ahead

Warning signs alert drivers to possible dangers or changing conditions ahead. They are usually diamond shaped with a yellow background and black symbols or lettering. Work-zone signs may also be diamond shaped, but their standard background is generally orange rather than yellow.

Source: Ohio Driver Manual — § 4, “Traffic Signs” and “Work Zone Signs”

Question 4

When an edge line is used, what type of line normally marks the right-hand edge of a roadway?

  1. A Broken white
  2. B Solid yellow
  3. C Solid white
  4. D Broken yellow

Correct answer: C – Solid white

A right edge line consists of a solid white line. It delineates the right-hand edge of the roadway and provides a visual reference for drivers. Yellow markings are generally used to separate opposing traffic or identify the left edge of certain divided or one-way roadways.

Source: Ohio Supplement and Federal Manual on Uniform Traffic Control Devices, 11th Edition — § 3B.09, “Edge Line Pavement Markings”, Ohio Driver Manual — § 4, “Lane Pavement Markings”

Question 5

A yellow diamond sign shows an arrow making a sharp right-angle bend. What does it warn of?

When you see this black and yellow sign, it means:
  1. A A one-way roadway beginning on the right
  2. B A construction detour to the right
  3. C A sharp right turn in the roadway ahead
  4. D A side road intersecting from the right

Correct answer: C – A sharp right turn in the roadway ahead

This is a Turn warning sign, indicating a sharp change in the road's direction. It is different from a side-road sign, which shows a smaller road joining the main roadway. As with other warning signs, it alerts the driver to a condition ahead that requires attention and an appropriate adjustment in speed.

Source: Ohio Supplement and Federal Manual on Uniform Traffic Control Devices, 11th Edition — § 2C.07, “Horizontal Alignment Signs (W1-1 through W1-5, W1-11, and W1-15)”, Ohio Driver Manual — § 4, “Traffic Signs”

Question 6

In Ohio, how must you respond to a flashing circular yellow signal at an intersection?

  1. A Maintain your speed while watching for traffic
  2. B Come to a complete stop before entering
  3. C Slow down, enter cautiously, and yield to lawful users in the intersection
  4. D Wait for the signal to display steady green

Correct answer: C – Slow down, enter cautiously, and yield to lawful users in the intersection

A flashing circular yellow signal permits a driver to enter an intersection cautiously. The driver must yield to pedestrians lawfully within an associated crosswalk and to vehicles lawfully within the intersection. A complete stop is not automatically required, but the driver should slow down and be prepared to stop if conditions require it.

Source: Ohio Rev. Code § 4511.13(E)(1) — Highway Traffic Signal Indications; Section Not Applicable to Railroad Crossings, Ohio Driver Manual — § 4, “Traffic Signals”

More Ohio BMV Temps Practice Tests