Tennessee Passenger Endorsement Practice Test (TN) 2

4.9 out of 5 (193 votes)
80% Passing score
20 Questions
4 Mistakes allowed
Getting your CDL passenger endorsement in Tennessee requires more than just passing the general knowledge test. Our TN passenger endorsement test is designed to ensure you're fully prepared for the specific challenges of driving a passenger vehicle. This comprehensive test covers a wide range of subjects that you'll encounter on the road. The 20 multiple-choice questions delve into essential topics such as safety practices, handling passengers, vehicle inspection routines, and driving techniques. You'll face real-world driving challenges and be tested on the required emergency equipment for passenger vehicles, such as fire extinguishers, first aid kits, and emergency reflectors. Our Tennessee cdl passenger test emphasizes the importance of being ready for any emergency situation. To pass, you need to score at least 80%, which means answering at least 16 questions correctly. This ensures you have a thorough understanding of all key areas, making you a knowledgeable and well-rounded commercial driver. The TN DMV practice test is tailored to the specific rules, regulations, and road signs unique to Tennessee. Since driving laws vary from state to state, this targeted approach ensures that you're studying the most relevant material for your test. Remember, to obtain your commercial driver's license, you'll also need to pass the general knowledge test. If you need to prepare for that, we offer general knowledge prep tests too. Our permit practice test includes several study aids to help you master the material more efficiently. If you find yourself stuck on a difficult question, you can request a hint to guide you toward the correct answer. And if you answer incorrectly, a detailed explanation will be provided to help you understand the correct response. This feature not only helps you learn but also reinforces your knowledge, ensuring you're well-prepared for the actual test. Prepare confidently for your TN CDL passenger test with our focused and state-specific practice materials. Your path to becoming a skilled and licensed commercial driver starts with the right preparation, and our Tennessee practice permit test is here to help you succeed.
FREE CDL Practice Test App
Pass your Tennessee CDL Passenger Endorsement test with the NextDoorDriving app. Real questions and answers—100% free and ad-free.
Download on the App Store

Sample Tennessee Passenger Test Questions

Question 1

What should a bus driver announce when reaching a destination or intermediate stop?

  1. A. Only the location and reason for stopping
  2. B. Only the next departure time and bus number
  3. C. The location, reason for stopping, next departure time, and bus number
  4. D. The destination and current weather conditions

Correct answer: C. – The location, reason for stopping, next departure time, and bus number

At a destination or intermediate stop, announce the location, the reason for stopping, the next departure time, and the bus number. These details help passengers understand where they are, how long the stop will last, and which bus they must reboard. Drivers should also remind departing riders to take their carry-on items.

Source: Tennessee Commercial Driver’s License Manual — § 4.2.4, “At Your Destination”

Question 2

Before driving a bus, when should you sign the previous driver's inspection report?

  1. A. Whenever one or more reported defects remain unresolved
  2. B. Only when the previous driver is present
  3. C. Whenever a mechanic asks for a signature
  4. D. After review confirms the defects are certified repaired or as not requiring repair

Correct answer: D. – After review confirms the defects are certified repaired or as not requiring repair

Federal inspection rules require a driver to review the last required vehicle inspection report before driving. When defects were reported, the carrier must certify that they were repaired or that repair was unnecessary. The driver's signature acknowledges review of the report and its repair certification; it does not replace the driver's responsibility to be satisfied that the bus is safe to operate.

Source: 49 CFR § 396.11(a)(3)(ii) – Driver vehicle inspection report(s), 49 CFR § 396.13(a)–(c) – Driver inspection, Tennessee Commercial Driver’s License Manual — § 4.1, “Vehicle Inspection”

Question 3

If excessive speed causes a bus to lean on a banked curve, which way will it lean?

  1. A. Toward the inside of the curve
  2. B. Toward the front of the bus
  3. C. Toward the rear of the bus
  4. D. Toward the outside of the curve

Correct answer: D. – Toward the outside of the curve

A bus that leans toward the outside of a banked curve is traveling too fast for the curve. A posted speed that is suitable for a passenger car may still be too high for a bus. Reduce speed before entering the curve because excessive speed can cause a bus to roll over with good traction or slide off the road with poor traction.

Source: Tennessee Commercial Driver’s License Manual — § 4.3.4, “Speed on Curves”

Question 4

Which practice best manages the limited space along the sides of a bus?

  1. A. Drive close to the right edge of the lane
  2. B. Avoid traveling beside other vehicles when possible
  3. C. Drive close to the left edge of the lane
  4. D. Depend on convex mirrors to eliminate every blind spot

Correct answer: B. – Avoid traveling beside other vehicles when possible

The Tennessee manual advises keeping a wide commercial vehicle centered in its lane and avoiding travel beside other vehicles when possible. A nearby vehicle could move into your lane, and side-by-side traffic may trap you when a lane change is needed. Convex mirrors improve the view but do not eliminate every blind spot or replace proper space management.

Source: Tennessee Commercial Driver’s License Manual — § 2.7.4, “Space to the Sides”

Question 5

A bus approaches a drawbridge with no traffic signal or attendant controlling traffic. Where should the driver stop?

  1. A. Between 15 and 30 feet before the draw
  2. B. At least 50 feet before the draw
  3. C. At least 100 feet before the draw
  4. D. At the edge of the draw

Correct answer: B. – At least 50 feet before the draw

The Tennessee CDL manual directs the bus driver to stop at least 50 feet before the draw when no signal or traffic-control attendant is present. Before proceeding, the driver must confirm that the draw is completely closed. With a green signal or an attendant controlling traffic, the driver may proceed after slowing and making sure it is safe.

Source: Tennessee Commercial Driver’s License Manual — § 4.3.6, “Drawbridges”

Question 6

During a coach or transit bus inspection, which condition must be verified at the battery box?

  1. A. The connections may be heavily corroded if they remain tight
  2. B. The battery must be secure, but the box cover may be loose
  3. C. The connections must not have excessive corrosion, and the box and its cover or door must be secure and undamaged
  4. D. The cell caps should be removed before the inspection

Correct answer: C. – The connections must not have excessive corrosion, and the box and its cover or door must be secure and undamaged

Tennessee’s CDL manual requires checking that the battery is secure, its connections are tight, and its cell caps are present. The connections must not show excessive corrosion. The battery box and its cover or door must also be secure and free from damage.

Source: Tennessee Commercial Driver’s License Manual — § 11.5.3, “External Inspection of Coach/Transit Bus”; “Battery/Box”

More Tennessee CDL Practice Tests
Other CDL Endorsements