Vermont CDL School Bus Practice Test (VT) 2026

4.7 out of 5 (72 votes)
80% Passing score
20 Questions
4 Mistakes allowed
Welcome to the Vermont CDL school bus practice test! If you're looking to earn your commercial driver's license with a school bus endorsement, you've come to the right place. Our Vermont learner's permit practice test offers a comprehensive mix of questions that are crucial for your success. From safety procedures and pre-trip inspections to basic control skills and on-road driving, this permit test practice ensures you're thoroughly prepared for the actual test. This VT DMV practice test includes 20 multiple-choice questions, and you'll need to answer at least 16 correctly to pass. This rigorous preparation equips you with the confidence you need to excel in the real permit test. The unique aspect of our Vermont CDL school bus practice test is its focus on specifics-each question is tailored to the school bus endorsement, ensuring you only study what you need to know. Our Vermont permit practice test doesn't just test your knowledge; it helps build it. With immediate feedback on each question and detailed explanations, you'll understand why an answer is correct or incorrect, aiding your learning process. This interactive approach ensures that you're not just memorizing answers but truly understanding the material, which is essential for safe and effective driving. In addition to safety procedures and regulations, our school bus endorsement test highlights the distinctive features of school buses. You'll learn about the high visibility design, painted in National School Bus Glossy Yellow, and other key safety features that make these vehicles unique and easily recognizable on the road. Remember, obtaining your school bus endorsement is a step towards a rewarding career. While this school bus endorsement practice test is specific to the school bus endorsement, you'll also need to pass the general knowledge test to earn your commercial driver's license. We offer a variety of permit test practice options, including general knowledge prep tests, to help you succeed.
FREE CDL Practice Test App
Pass your Vermont CDL School Bus test with the NextDoorDriving app. Real questions and answers—100% free and ad-free.
Download on the App Store

Sample Vermont School Bus Test Questions

Question 1

At a railroad crossing where a school bus must stop, what basic check must the driver complete before proceeding?

  1. A Stop and proceed when the warning lights are off
  2. B Stop and listen without checking both directions
  3. C Slow down and check the tracks without stopping
  4. D Stop, look, and listen, then proceed only when safe

Correct answer: D – Stop, look, and listen, then proceed only when safe

Vermont law requires a school bus to stop between 15 and 50 feet from the nearest rail at crossings where a stop is required. While stopped, the driver must look and listen in both directions for trains, on-track equipment, and warning signals. The bus may proceed only when the crossing can be made safely.

Source: Vermont Commercial Driver’s License Manual — § 10.4.3, “Recommended Procedures”, 23 V.S.A. § 1072(a), (c) – Certain vehicles must stop

Question 2

After stopping, securing the bus, and activating the red lights and stop arm, what is the driver’s final check before allowing students to approach?

  1. A Verify that all traffic has stopped before fully opening the door and signaling students
  2. B Release the parking brake so the bus can leave quickly
  3. C Turn off the red lights before opening the door
  4. D Ask the students to check approaching traffic

Correct answer: A – Verify that all traffic has stopped before fully opening the door and signaling students

The Vermont CDL manual’s stopping sequence ends with a final check that all traffic has stopped. Only then should the driver completely open the service door and signal students to approach. This check follows securing the transmission and parking brake and activating the alternating red lights and stop arm.

Source: Vermont Commercial Driver’s License Manual — § 10.2.1, “Approaching the Stop”

Question 3

Under Vermont equipment rules, what is the required basic body color for Type I and Type II school buses?

  1. A Safety red
  2. B Fluorescent yellow-green
  3. C Highway orange
  4. D National school bus glossy yellow

Correct answer: D – National school bus glossy yellow

Type I and Type II school buses must be painted national school bus glossy yellow. The law permits specified color variations for the hood, fenders, and roof. A multifunction school activity bus is a different vehicle category and may be painted another color.

Source: 23 V.S.A. § 1283(a)(2) – Identification and equipment of school buses, 23 V.S.A. § 1287(c) – Multifunction school activity bus

Question 4

What should a properly adjusted overhead inside rearview mirror allow a school bus driver to see?

  1. A Every student, including the heads of students seated directly behind the driver
  2. B Traffic at least 400 feet behind the bus
  3. C Both front tires where they touch the road
  4. D The entire area immediately in front of the bumper

Correct answer: A – Every student, including the heads of students seated directly behind the driver

The overhead inside mirror should show all students, including the heads of those directly behind the driver. The top of the rear window should appear at the top of the mirror. This mirror does not provide a complete view behind the bus, so exterior side mirrors must be used to monitor rear traffic.

Source: Vermont Commercial Driver’s License Manual — § 10.1.6, “Overhead Inside Rearview Mirror”

Question 5

What should a school bus driver do after passing a student’s designated unloading stop?

  1. A Do not back up; follow the established local procedure
  2. B Reverse carefully to the missed stop
  3. C Let the student off at the next stop without authorization
  4. D Stop immediately and discharge the student beside the road

Correct answer: A – Do not back up; follow the established local procedure

A driver who misses a student’s unloading stop must not back the bus to return to it. The driver should follow the applicable local procedure for handling the situation. The student should not simply be discharged at an unauthorized location, and backing is especially hazardous when children may be near the bus.

Source: Vermont Commercial Driver’s License Manual — § 10.2.3, “Unloading Procedures on the Route”

Question 6

At a passive railroad-highway crossing, who is responsible for making the final decision to proceed?

  1. A The school bus driver
  2. B The route dispatcher
  3. C The passengers seated at the front
  4. D The driver of the vehicle behind the bus

Correct answer: A – The school bus driver

The Vermont CDL manual places the decision to proceed at a passive crossing in the driver’s hands. The driver must recognize the crossing, search for trains using the tracks, and determine whether enough clear space exists to cross safely. A passive crossing has no traffic-control device to make that decision for the driver.

Source: Vermont Commercial Driver’s License Manual — § 10.4.1, “Types of Crossings”

More Vermont CDL Practice Tests
Other CDL Endorsements