Mississippi Road Signs Test Simulator

4.9 out of 5 (85 votes)
80% Passing score
25 Questions
5 Mistakes allowed
Mississippi includes road signs and signals inside the main learner permit knowledge exam, so treating them like filler material is a bad strategy. They count. They show up alongside traffic laws, safe driving rules, licensing requirements, and the rest of the material pulled from the Mississippi Driver’s License Manual. This Mississippi DMV road signs practice test narrows the focus on purpose, giving you a cleaner way to work through the sign questions before you sit for the full exam at a Driver Service Bureau location. The setup is straightforward, but not flimsy. Each round gives you 20 multiple-choice questions drawn from a larger road sign question bank, and you need at least 16 correct answers to pass this practice test. The real Mississippi permit test is broader: it is commonly reported as 30 multiple-choice questions, with 24 correct answers needed for a passing score of 80%. So, yes, this simulator is smaller. That is the point, more or less. It lets you isolate the signs-and-signals material instead of trying to study everything in one giant, mildly exhausting sweep. You also get immediate feedback as you answer, with explanations that do more than pat you on the back or tell you to try again. A missed question about a warning sign, school zone sign, regulatory sign, lane marking, or signal is a small warning flare that you need to slow down and actually learn the meaning. Not just the color. Not just the shape. The meaning, in traffic, with other drivers doing whatever they are doing around you. And, since this is Mississippi, a few state-specific details matter too. The real knowledge exam must be taken in person, electronic devices are not allowed in the testing area, and applicants also have to pass a vision exam. Younger drivers may need school attendance paperwork, and under-17 licensing has its own requirements later on, including the permit holding period and driving affidavit. That is not all part of the road signs drill, obviously, but it is part of the larger testing picture. Use this MS DMV practice test as a focused rehearsal. Run through a set, read the explanations, take another one, and keep going until Mississippi road signs feel less like guesses and more like information you can actually use on the road.
FREE DMV Practice Test App
Study for your Mississippi permit test or driver’s license with the NextDoorDriving app. 700+ DMV questions and answers, 100% free!
Download on the App Store

Sample Mississippi Permit Test Questions

Question 1

What type of line normally marks the right-hand edge of the traveled roadway?

  1. A A broken white line
  2. B A solid yellow line
  3. C A solid white line
  4. D A broken yellow line

Correct answer: C – A solid white line

A solid white edge line normally marks the right side of the traveled roadway. Yellow edge lines are used along the left side of divided highways, one-way roadways, and ramps. Broken white lines ordinarily separate lanes carrying traffic in the same direction rather than marking the roadway edge.

Source: Manual on Uniform Traffic Control Devices, 11th ed. with Revision 1 — § 3B.09, “Edge Line Pavement Markings”, Mississippi Driver’s License Manual — “Pavement Markings,” “Lane Lines, Center Lines, & Barrier Lines”

Question 2

A yellow, pennant-shaped sign identifies which roadway condition?

The sign with this shape and color is a _____________ sign.
  1. A A no-passing zone ahead
  2. B Wrong-way travel
  3. C A railroad crossing ahead
  4. D A required stop ahead

Correct answer: A – A no-passing zone ahead

The yellow pennant warns that a no-passing zone begins ahead. Mississippi’s manual identifies the pennant as the standard shape for this warning. Observe the accompanying centerline markings and do not begin a pass within the restricted area.

Source: Mississippi Driver’s License Manual — “Traffic Signs and Signals,” “Standard Shapes and Colors”

Question 3

At a Mississippi railroad crossing, what must you do while the red warning lights are flashing?

  1. A Stop only when a train is visible
  2. B Slow down and cross without stopping
  3. C Stop and wait until the lights stop flashing and the crossing is clear
  4. D Cross after the gate begins to rise

Correct answer: C – Stop and wait until the lights stop flashing and the crossing is clear

Flashing railroad-crossing lights require a complete stop even when no train is visible. Remain stopped until the tracks are clear, any gate is raised, and the warning lights have stopped flashing. Never drive around a lowered crossing gate.

Source: Mississippi Driver’s License Manual — “Railroad Crossings”

Question 4

What does a red-and-white triangular YIELD sign require?

  1. A Stop every time before entering the intersection
  2. B Continue at the same speed if no signal is present
  3. C Yield only to vehicles approaching from the left
  4. D Slow down, yield the right-of-way, and stop if necessary

Correct answer: D – Slow down, yield the right-of-way, and stop if necessary

The triangular shape is reserved for YIELD signs. In Mississippi, a driver approaching one must reduce speed and give the right-of-way to traffic close enough to present a hazard. If the way is clear, the driver may proceed without making a full stop.

Source: Mississippi Driver’s License Manual — “Standard Shapes and Colors”; “Regulatory Signs”

Question 5

A pentagon-shaped sign showing children walking warns of:

This road sign means:
  1. A A stop sign ahead
  2. B A school area or school crossing ahead
  3. C A pedestrian-only shopping district
  4. D A playground where vehicles are prohibited

Correct answer: B – A school area or school crossing ahead

Pentagon-shaped signs identify school zones or school crossings. A school-crossing sign warns that children may cross the roadway while traveling to or from school. Watch carefully for children and obey any accompanying speed restrictions or crossing controls.

Source: Mississippi Driver’s License Manual — “Standard Shapes and Colors”; “Warning Signs”

Question 6

A round yellow sign marked with a black X and the letters “R R” warns of:

This sign is a warning that you are approaching:
  1. A An intersection ahead
  2. B A pedestrian crossing ahead
  3. C A railroad crossing ahead
  4. D A work zone ahead

Correct answer: C – A railroad crossing ahead

A round warning sign indicates that a railroad crossing is ahead. Begin watching for tracks, trains, gates, and active warning signals. Be prepared to stop when a train is approaching or a crossing signal requires it.

Source: Mississippi Driver’s License Manual — “Standard Shapes and Colors”; “Warning Signs”