Washington DOL Sign Test 4

4.8 out of 5 (579 votes)
80% Passing score
20 Questions
4 Mistakes allowed
A solid score on the Washington knowledge test starts with signs, because signs are where the DOL can ask very plain-looking questions that still catch people who only skimmed the guide. This Washington DOL sign test keeps the focus there: colors, shapes, symbols, regulatory signs, warning signs, work zone signs, service signs, destination signs, pavement markings, and the kind of road-sign details that are easy to recognize in traffic but harder to explain when they show up as a multiple-choice answer. The real Washington driver knowledge test is based on the Washington State Driver Guide and covers more than signs, of course. You are expected to know traffic laws, lane use, intersections, speed rules, stopping, right-of-way, safe driving practices, impaired and distracted driving, and how to share the road with pedestrians, bicyclists, motorcycles, emergency vehicles, and large vehicles. And yes, that is a lot to hold in your head at once, especially when some of it feels obvious until the answer choices start splitting hairs. The official test has 40 multiple-choice questions, and you need 32 correct answers to pass. That means 8 misses are allowed, which works out to an 80% passing score. Once you pass, the knowledge-test result is valid for 2 years, though the actual test fee depends on where you take it. This Washington DMV sign test is shorter and more targeted. It gives you 20 multiple-choice questions on road signs and related markings, with a passing score of 16 out of 20. That 80% mark is intentional; it gives you a clean way to measure whether your road-sign knowledge is actually holding up before you move on to the full Washington knowledge test practice. Expect the usual suspects—stop, yield, wrong way, do not enter, no passing, school zone, railroad, pedestrian, merge, work zone, and lane-use signs—along with questions about what sign colors and shapes are trying to tell you before you even read the words. The practice itself is built to teach, not just grade. Hints can nudge you when a question starts looking suspiciously close between two answers, and explanations after missed questions help lock in the rule instead of letting you guess your way through. When you finish, you can review what you missed, retake the Washington DOL sign test, and keep tightening the weak spots. It is permit test road signs practice with a narrow job: make the sign section feel familiar, boring even, before the real Washington driving test practice puts your preparation on the clock.
FREE DMV Practice Test App
Study for your Washington permit test or driver’s license with the NextDoorDriving app. 700+ DMV questions and answers, 100% free!
Download on the App Store

Sample Washington Permit Test Questions

Question 1

An orange diamond-shaped warning sign usually alerts you to:

  1. A Construction or maintenance activity, including workers and equipment
  2. B Fuel, food, or lodging services
  3. C A collision that has already occurred
  4. D A mandatory stop at every work-zone entrance

Correct answer: A – Construction or maintenance activity, including workers and equipment

Orange signs provide construction and maintenance warnings. They are used where work or emergency operations may affect the roadway, and they can alert drivers to people working near traffic. Watch for workers, equipment, temporary lane arrangements, and other directions displayed by work-zone traffic-control devices.

Source: Washington State Driver Guide — Ch. 4, § 4.12, “Work zone signs”

Question 2

What does a flashing yellow traffic signal require?

  1. A Merge with traffic immediately
  2. B Proceed only with caution
  3. C Stop for pedestrians regardless of their location
  4. D Come to a complete stop before continuing

Correct answer: B – Proceed only with caution

A flashing yellow signal permits drivers to continue through the intersection or past the signal only with caution. It does not impose the automatic full-stop requirement of a flashing red signal. Observe traffic and roadway conditions carefully before proceeding.

Source: RCW 46.61.065(1)(b) – Flashing signals

Question 3

Orange signs and cones along a freeway mean you should be prepared for:

  1. A A lane change while maintaining your current speed
  2. B Workers, equipment, and temporary changes in roadway conditions
  3. C Every travel lane to end immediately
  4. D A higher speed limit through the affected area

Correct answer: B – Workers, equipment, and temporary changes in roadway conditions

Orange signs identify construction and maintenance warnings, while cones guide traffic through temporary arrangements. A work zone may place workers or equipment near the roadway and may alter lanes or driving conditions. Follow the posted signs and directions and remain alert for activity in or beside the travel path.

Source: Washington State Driver Guide — Ch. 4, § 4.12, “Work zone signs”

Question 4

In Washington, a painted median at least 18 inches wide, formed by solid yellow markings or yellow crosshatching, is:

  1. A A lane reserved for entering driveways
  2. B A dividing area that must not be crossed except at an authorized opening, crossover, or intersection
  3. C A lane for beginning or completing left turns
  4. D A shared center turn lane

Correct answer: B – A dividing area that must not be crossed except at an authorized opening, crossover, or intersection

State law recognizes a marked median island at least 18 inches wide as a dividing section of the highway. Drivers may not travel over, across, or within that median. Crossing is allowed only through an opening or at a crossover or intersection established by public authority.

Source: RCW 46.61.150 – Driving on divided highways

Question 5

At a steady circular green signal, you may:

  1. A Enter after slowing, even if the intersection is blocked
  2. B Proceed only after making a complete stop
  3. C Proceed straight or turn when permitted, after allowing the intersection to clear
  4. D Proceed straight but never turn right

Correct answer: C – Proceed straight or turn when permitted, after allowing the intersection to clear

A circular green signal permits a driver to proceed straight or turn right or left unless a sign prohibits the turn. A turning driver must allow vehicles already lawfully within the intersection to complete their movements. The driver must also stop for pedestrians lawfully within the intersection as required by law.

Source: RCW 46.61.055(1)(a) – Traffic control signal legend

Question 6

In Washington, a red curb that marks a fire lane means:

  1. A Do not stop or park there
  2. B Parking is reserved for commercial vehicles
  3. C Only vehicles displaying disabled parking privileges may park there

Correct answer: A – Do not stop or park there

Fire lanes are commonly identified by red stripes or a red curb. Drivers must not park or stop in a marked fire lane. Because red or yellow curb paint can also indicate a loading zone or another local restriction, always read any nearby signs to identify the specific restriction.

Source: Washington State Driver Guide — Ch. 4, § 4.16, “Fire lane”, Washington State Driver Guide — Ch. 4, “Signs or painted curbs”